Lithium battery is a kind of energy storage conversion device that is more and more widely used. Because of its excellent electrochemical performance, it realizes a small-medium-large market application scenario that keeps pace with the times. When we talk about lithium batteries When using the method correctly, it usually refers to small applications, namely consumer electronics, such as smart phones and laptops. Because large and medium-sized applications are based on small-scale application technologies, small-scale applications have common characteristics, while large- and medium-scale applications are much more complex. Generally, medium-scale applications are in new energy vehicles, which are generally called power batteries; large-scale applications are usually On the base station, we generally call it an energy storage battery. So when we talk about “how to use lithium batteries”, limiting lithium batteries to small applications is in line with people’s habitual understanding.
The working principle of a lithium battery is nothing more than charging to store energy, and discharging is converted into other energy and released. It is in an idle state when it is neither charging nor discharging. Therefore, the correct use of lithium batteries has three major aspects: correct charging, correct discharging, and correct maintenance.
Correct charging method of lithium battery
Grasp the time and prevent overcharging. Do the right thing at the right time, although the lithium battery itself has excellent electrochemical performance, however, any kind of thing will have safety hazards when it deviates from the equilibrium state. In detail,
- When charging, charging. In the early days of the emergence of smart phones, out of the original intention of protecting their own interests, each mobile phone manufacturer often emphasized the use of original chargers (including charging cables) to charge electrical equipment. Some manufacturers designed special data cables and did not support others. Charger (including charging cable). Later, as the application of smart phones and laptop computers became more and more widely used, it was obvious that it would be self-confidence if it continued to do so. So now everyone has basically unified the standard, a charger/cable can charge electrical appliances of different brands and properties. Charging is convenient, and a problem that users should pay attention to is to try to keep the battery with the power of normal use at all times. Under normal circumstances, when the battery is too low, both the mobile phone and the laptop will give a reminder. At this time, you need to recharge in time. Although the battery is too low will not cause a direct safety accident, but overuse will cause damage to the battery structure over time .
- Just fill it up. Lithium battery cells are also made up of many components. The new battery is good. If it takes a long time, the function of which component may deteriorate, so overcharge safety risks will occur. Several typical accidents in which Samsung and Apple were exposed were caused by the owners of electrical appliances putting their mobile phones on the bedside to charge them while they were sleeping, which eventually caused burns and explosions.
- Do not use one mind and two purposes. I have experienced that using the mobile phone while charging, especially when playing games, it is easy to feel the mobile phone heat up. The reason is also very simple. The mobile phone is equivalent to doing two jobs at the same time, which makes it necessary to pay more than double the labor force, and the body naturally heats up. Up.
Correct discharge method of lithium battery
Charge in time to prevent over-discharge. Ordinary mobile phone users are not aware of the hazards of over-discharge, because there are usually no reports of safety accidents in over-discharge. Moreover, some people even think that regular deep discharge is good for the maintenance of battery performance. In fact, this is not the case, because the memory effect of lithium batteries is negligible, and there is no saying that deep discharge eliminates the memory effect. Theoretically, the total cycle life of a lithium battery with deep discharge will be longer, but the risk is that over-discharge of the battery will cause the battery voltage to be too low, and it will not be able to charge normally. Sometimes it will take a long time to turn on or even fail to turn on. The two evils are the lesser one. A shorter service life is better than no use. Therefore, users of mobile phones and laptops are advised not to frequently use black screens.
Lithium battery is properly maintained
The temperature is suitable, and it is resistant to cold and heat. When idle, lithium batteries usually do not have safety accidents. The purpose of daily maintenance is to place the lithium batteries in a suitable environment to delay the aging of the batteries. In fact, one of the parameter designs of lithium batteries is the appropriate temperature. Relatively speaking, lower temperature is not a big problem, but if it is placed at a higher temperature, as the saying goes, the thing is extremely reversed, which will also cause safety problems. The idle state we are talking about is only in terms of the normal environment. If the lithium battery is placed in water or close to the fire source, it will be out of the topic of “maintenance”. Then, what is to be done in a normal environment? The water side is moisture-proof and the hot side is sun-proof. Therefore, the suitable environment for daily maintenance of lithium batteries should be four words: ventilation and coolness. These four words should be followed regardless of whether the lithium battery is left unused independently or used in electrical appliances.
In the correct use of lithium batteries, the charging method of lithium batteries is the most important, because incorrect charging methods will cause safety problems, and discharge and daily maintenance affect only the service life of lithium batteries, and lithium batteries themselves are also a kind of Consumables, no matter what we take, we can’t avoid its final loss, but we use the correct method to delay its aging.